OTHER PIPELINE SERVICES
1. Pipe laying
3. Bolt torquing
4. Cold cutting
5. Flange facing
6. Nute splitting
7. Hot tapping
8. Emergency pipiline repairs
BOLT TENSIONING SERVICES
MENL’S hydraulic bolt tensioning services get the job done faster, better, and safer and thereby minimizing costs and downtime. In addition, the risk of work-related injury is dramatically reduced during flange make-up or break-out. Using tensioners and link hoses, we can tension or de-tension all studs simultaneously from the safety of the operator console at the pump unit, speeding up the process, eliminating pinch point injuries and ensuring precise and equally distributed clamping pressure.
MENL through Technical partnership offers full bolt tensioning services to cover most applications. We have a complete line of bolt tensioning equipment in-house and technicians with many years’ experience in bolt tensioning. Our services include: pre-job walk-throughs, safety meetings, bolt tensioning services and final job reports including tensioning certificate.
Do you have galled, stripped, or stubborn nuts and bolts that are causing you delays during critical times? There’s no need to get a hot work permit and perform an unsafe act in burning the nuts off. Millennium Torque & Tensioning can provide you with a safe, spark-free solution with our line of Hydraulic Nut Splitting tools. Our tools have a compact design and can be operated off of standard air or 110v hydraulic pump. Whether you need to split nuts that are as small as 1-1/4”, or as large as 6-1/8”, our tooling has got you covered. All of our nut splitters are available to rent, purchase, or you can have our field service technicians come to your jobsite and do the job for you.
PIPE CUTTING – ONSITE MACHINING
Pipe cutting is the process of cutting any size of pipe either perpendicular to its length or at an angle. There is no limitation to diameter or wall thickness. MENL’s range of cold cutting and weld prepping machines can quickly cut and weld prep pipes to a finish suitable for welding. Weld preps can be formed to any requirements, such as straight, 37.50, bevels and ‘j’ prep configurations.
OTHER PIPE LINE REPAIRS SERVICES :
FLANGE FACING – ONSITE MACHINING
Flange facing is a process of machining the faces of flanged and other types of pipe and vessel connectors. It is used to repair faces either damaged from impacts with other components during construction or installation or from corrosion and erosion due to turbulent flow or cuts from gasket leaks.
MENL in partnership with ABS can machine most sizes and types of flange from Raised Face to Ring Joints. We have O.D. Mount and I.D. Mount equipment so no matter the flange we can machine it in place, and all work is done to industry standards and specifications.